|
This Rounds off the MASTER H-Series:
|
|
UMB Connectors
With the UMB connectors (Universal Mounting Brackets), you can connect the MASTER H-Series very easily from “above, below and at the front“. Suitable for may of the common connection drilling patterns. Thus, replacement of cable and hose carriers of other manufacturers is easily possible.
|
UMB Connectors
|
|
Strain Reliefs
In both the ranges, the strain relief of the conduits is possible with a strain relief comb or with strain relieving elements that are fastened on a C-rail. Both the strain relief comb as well as the C-rails are fixed by means of the UMB connectors and do not have to be screwed separately. Our SZL strain reliefs are best suited for the C-rails. They ensure a large-surface embracing of the cables and a fixed pressure.
|
Strain relief
|
|
Glide Shoes
And yet another practical and economical detail: Detachable and hence replaceable glide shoes significantly increase the life of the cable carriers in gliding operation. In case of wear, only the inexpensive glide shoes are replaced and the cable carrier becomes fully functional again. Replacing the complete cable carrier is not necessary.
|
Exchangeable glide shoes
|
 |
Thanks to a positive locking snap connection, both damper elements as well as glide shoes sit firmly on the chain link.
|
|
|
|
|
|
Damper elements
Thanks to the detachable damper elements on the outer radius, the noise development of the already very silent MASTER Series can be reduced even further. These dampers are recommended when using the cable carriers in guide channels.
|
Damper Elements
|
|
 More Possibilities with Lower Weight: The New MASTER H-Series is Here!
Lightning-fast Population of the Carriers:
 The MASTER H-Series can be Opened in Seconds
 Back to top of page  Back to overview of news archive 2005
|
