Damping elements ontelescopic covers
Telescopic covers with travel speeds greater than 15 m/min must be provided with dampers in order to reduce impact noises.
|
|
Wiper type MA 18 with damping
|
|
|
|
 |
The support profile is made of aluminium and is screwed or riveted on. The wiper lip is identical to MA 12.1. The special damping profile can be installed in the rear aperture formed onto the support profile.
Necessary calculated distance of the cover plates 5.5 mm.
|
|
|
|
Brass strips with damping
|
|
|
|
 |
Brass strips are used primarily on standing covers. The damping profile described above can likewise be mounted on an appropriately drawn brass profile.
Necessary calculated distance of the cover plates 5.5 mm.
|
|
|
|
Vibration absorber
|
|
|
|
 |
To damp impact noise effectively, vibration absorbers can be fitted in the rear walls of the covers. Depending on the individual situation and travel speed, the number of dampers is varied in order to achieve an optimum result.
|
 |
|
|
|
Damping elements for compression
|
|
|
|
 |
Damping elements that only work during expansion require an additional element for compression. Here simple rubber buffers mounted at an appropriate point on the rear wall have proven themselves over many years.
|
Turn-Key Systems
Back to top of page