|
|
|
Way wiper BAY-WIPE
System with optimised corner design.
Many wiper systems have problems at the point where a hydrostatic guideway goes round a corner. Rounded or bevelled corners on guideways are often problem areas, because the wiper elements cannot follow the profile closely enough.
Our BAY-WIPE system now has these problem areas perfectly under control. Thanks to its optimised corner elements, which follow the contours of the path exactly, the guideway is wiped clean in both directions.
|
|
Properties
- Effectively prevents lubricants and coolants from escaping
- Corner elements to ensure perfect contact
- Modularly configured wiper system
- Max. 0.3 mm deformation of wiper edge
- Grease- and acid-resistant wiper lip
- Standard length of bar material: 500 mm
|
|
|
Intelligently designed, individually produced
|
|
 The wiper lip of the BAY-WIPE was developed at the Institute for Machine Elements (IMA) at the University of Stuttgart. KABELSCHLEPP participated in this research project, and put the results into practice in a consistent manner.
A wiper lip that works in both directions is affixed directly to the support profile by means of a plastic injection moulding process. The straight sections of this profile, which have been cut to length, are then nonpositively joined with pre-assembled corner elements. This allows a wiper system to be created from the individual parts, exactly suited to the contours of the guideway.
|
|
|
|
|
|
Your contact person
|
|
| |
|
|
|
Questionnaire
|
|
Contact us using the questionnaire to find a solution to your individual application problem
|
|
Turn-Key Systems
Back to top of page