|
|
|
Way wiper types BA and BAS.
Wipers of this type have a replaceable lip and guarantee high form stability and mechanical loading capacity. They are manufactured in custom forms according to your specifications.
Available as bar material ex-stock.
|
 |
|
Note: Reduce costs
With types BA and BAS the wiper lip is replaceable. In case of wear, only the lip has to be exchanged; the support profile can remain in use.
|
|
|
Properties
- Temperature range -40 °C to 100 °C
- Support material: Aluminium
- Wiper lip material: Polyurethane
- Largely resistant to oils, greases, alkalis and water
- Pretension approx. 2 mm
- Replaceable wiper lip
- Standard length of bar material: 1000 mm
- Inside or outside wiping forms are possible
|
|
|
Dimensions and types
|
|
Type BA
 Way wipers of this type are used mainly in those cases where installation conditions are restrictive, or where the wipers are additionally protected by means of a telescopic cover, a bellows, a link apron cover, or where no chips occur.
| Type |
Installation height H
(clamped in position) |
| BA 18 |
17,5 |
| BA 25 |
23,5 |
Standard length: 1000 mm
|
Type BAS
 In this type series, the light metal support provides protection for the wiper lip. It is used primarily in the case of direct incidence of chips (no hot chips).
| Type |
Installation height H
(clamped in position) |
| BAS 18 |
17,5 |
| BAS 25 |
23,5 |
| BAS 40 |
39,5 |
Standard length: 1000 mm
|
|
|
Pre-wiper for protection of the guideway
To protect the wiper lip from hot chips, and to remove coarse and stubborn dirt from the guideway, the way wiper must be fitted with a pre-wiper made from stainless spring steel or brass.
The pre-wiper and its corresponding light metal clamping strip are affixed to the machine component with the fastening screws of the wiper.
For straight way wipers with a corresponding hole pattern (distance between holes = 80 mm), the clamping strip is not required.
|
|
|
|
|
|
|
Your contact person
|
|
| |
|
|
|
Questionnaire
|
|
Contact us using the questionnaire to find a solution to your individual application problem
|
|
Turn-Key Systems
Back to top of page