Way wiper BA 65 VARIO
The most economical alternative to cast wipers – even for small quantities. On request we also manufacture them according to your specifications – custom tailored for your application.
BA 65 VARIO way wipers are optionally available as complete wipers, or as individual wiper lips in bar form for your own harnessing.
|
 |
|
So-called "cast wipers" are wipers consisting of a piece of neoprene rubber vulcanised onto a steel support profile. They are produced in specially-manufactured injection moulds. Lager quantities are essential, as the tool costs must be offset by the number of parts produced.
The wiper system BA 65 VARIO is a new development for which no special tools are required: A pre-finished profile of synthetic rubber is custom-tailored. The support profile – usually made from metal – can be produced on a laser or nibbling machine.
Thus smaller quantities can be produced in this way at a reasonable cost.
|
|
Properties
- Temperature resistance – 40 °C to + 100 °C, briefly up to 140 °C
- Support material: Steel, stainless steel
- Wiper lip material: Abrasion-resistant synthetic rubber (NBR)
- Resistant to standard oils, greases, acids and bases
- Pretension of the wiper lip: max. 1 mm
- Resistant to microorganisms
|
Dimensions
|
|
|
| Type |
Type Pretension
(max.) |
| BA 65-14 |
1 |
| BA 65-18 |
1 |
| BA 65-25 |
1 |
Lenght: 500 mm
|
|
Delivery options
|
|
1. Construction set as individual parts
The support material and wiper lips are produced according to your specifications, and put together as a construction set.
- Easy assembly of the individual parts
|
|
2. Ready-to-install wiper system
All parts are supplied affixed to the support profile.
- Ready-to-install wiper system
|
|
3. Separate wiper lip
If your production department can produce the required support plates itself, you can order the wiper lip from us separately. The delivery length is500 mm.
|
Turn-Key Systems
Back to top of page