|
ROBOTRAX Accessories
A suitable accessory for every application
|
|
|
Impact protection
|
|
|
 |
When a robot is moving, a striking of the ROBOTRAX against machine components often cannot be avoided.
An impact protective device made of elastomer plastic can easily be attached to each link using a cable tie.
|
|
|
Heat shield/Protective sleeve
|
|
|
 |
Heat shield: The heat shield, made of aluminium-coated textile fiber, protects the cable carrier and the cables within from flying sparks. A heat shield is recommended where there are flying sparks.
|
|
|
Protective sleeve: The protective sleeve made of layered polyester offers protection against aggressive cutting and hydraulic oils as well as from fine dusts and paint sprays (not illustrated).
|
|
|
Chucking device
|
|
|
 |
This can be used to set the steel wire to the desired tension quickly and easily, and can be readjusted at any time.
|
|
|
Strain relief
|
|
|
 |
For securing the cables and hoses.
(A strain relief device cannot be used on the same end of the ROBOTRAX as a chucking device.)
|
|
|
Bend radius determiner
|
|
|
|
|
|
|
 |
This is used to achieve larger bend radii than the standard maintain the minimum bend radius of the cables.
|
|
|
|
|
|
|
Quick-opening bracket mounted on a rotary plate
|
|
|
|
|
|
|
|
Yet one more degree of freedom on the fastening points.
The quick-opening mounting bracket can also rotate on a rotary plate, thus providing greater flexibility when the robot is performing complex movements.
|
|
|
 |
 |
|
|
|
|
|
|
Quick-opening bracket on a helical spring
|
|
|
|
|
|
|
 |
If the bracket is mounted on a helical spring, it can give elastically in all directions, swivel, swing out in 3 dimensions and spring back ito place again.
|
|
|
 |
|
Turn-Key Systems
Back to top of page