KABELSCHLEPP Metool: Cable and Hose Carrier Systems, Guideway Protection Systems, Conveyor Systems

QUANTUM – Link-free cable carriers
The design

Extruded sidebands

	With the QUANTUM cable carrier system, sidebands made of extruded special plastic are used.

	Two steel wires in the supporting base of the profile bars increase the service life as well as the tensile and bending strength of the entire cable carrier system.
Owing to the link-free design, there is no more noise resulting from the impact of the chain links on the radius limits. Even the "striking" of individual chain links on the floor is eliminated. This reduces the noise level and vibrations almost to zero. The low-vibration operation minimizes the wear of the outer sheaths of the cables.
	The sidebands are connected, as is the case with our variable chain width cable carriers, with stay systems that have proved themselves over many years.

Stay variants for the types
Q 040, Q 060, Q 080 und Q 100

Frame stay RS made of aluminium –
Standard design – types Q 060, Q 080, Q 100

For lightweight to medium loads.

Opening options:
Outside / Inside: the cable carrier can be opened quickly and easily simply by rotating the stays through 90°.
Frame stay RV made of aluminium –
Reinforced design – types Q 080, Q 100

For medium to heavy loads and for large chain widths.

Opening options:
Outside / Inside: the cable carrier can be opened quickly and easily simply by rotating the stays through 90°.
Frame stay RE made of plastic –
types Q 040, Q 060, Q 080, Q 100

Opening options:
Outside / Inside: simply by turning